Maintenance Of Belt Conveyor Roller

- Jun 26, 2018-

1. Bearing

The shaft of the crusher bears the full load of the negative machine, so good lubrication has a great bearing on the bearing life. It directly affects the service life and operating rate of the machine. Therefore, the injected lubricating oil must be clean and the seal must be good. The main oil filling place (1) rotating bearing (2) roll bearing (3) all gears (4) moving bearing, sliding plane.

2. Looseness of newly installed tyres is often subject to frequent inspections.

3. Pay attention to the work of all parts of the machine is normal.

4. Pay attention to check the wear of the wear parts, always pay attention to replace the worn parts.

5. Put the mobile device's chassis plane, should go out of dust and other things to avoid the machine encountered the material can not be broken when the mobile bearing can not move on the chassis, resulting in serious accidents.

6. If the bearing oil temperature rises, you should immediately stop and check the cause to eliminate it.

7. If the impact sound of the rotating gear during operation should immediately stop and check, and eliminate.